一种最小变形度全景视频映射方法

全景视频需要经过采样映射转换成平面矩形视频,以便后续的压缩编码.针对现有映射方法存在的内容变形和采样不均匀问题,提出一种最小变形度映射方法(Minimum Deformation Projection,MDP).首先提出新的变形度计算公式求得最优解,其次结合像素排列为矩形的要求和人工边界等因素对最优解做近似,最后得到了最优的多边形映射形状和像素排列方案.实验数据表明,MDP的采样密度更均匀,结合使用x265,相对于ERP可以获得约14.47％的增益,优于其他映射方法.     

结合注意力的3D卷积网络脑胶质瘤分割算法

为了提升脑胶质瘤分割精度，提出一种结合注意力机制的3D卷积神经网络算法。输入3个不同尺度的图像块，经过9个卷积层和1个分类层后得到3个不同的分类结果，将分类结果与注意力学习到的权重相乘并逐体素相加得到输出。此外该算法采用了一种混合Dice损失函数与Focal损失函数的超参数损失函数。实验表明，该算法的Dice系数在整体区域、核心区域以及增强区域分别达到了95.31%、80.12%、82.25%。与已有的一种脑胶质瘤分割算法deepmedic相比，整体区域、核心区域以及增强区域的Dice系数分别提升了3%、2%、6%。在脑胶质瘤分割方面，具有重要的临床意义。     

地表移动带范围内建构筑物安全可靠性分析

地表建构筑物位于在生产矿山地表开采移动范围内，如果按照一般圈定地表移动范围原则判断建构筑物的安全可靠性，结果是不安全或者预留保安矿柱可保证安全。为分析地表移动带范围内建构筑物安全可靠性，采用FLAC3D软件建立数值模拟模型，对矿区地表移动进行分析研究，并结合建构筑物的破坏等级评判标准，可以更加合理地判断地表移动范围内建构筑物的安全可靠性，对存在相似条件的矿山具有一定的借鉴意义。     

急性炎性疾病患者乳酸林格氏液液体动力学

目的:探索炎性疾病患者的乳酸林格氏液（Ringer's lactate,RL）液体动力学特征以及炎性生物标记物是否可以作为协变量影响RL分布和排泄。方法:本研究为前瞻性队列研究。选择40例美国麻醉医师分级（ASA）I-II级，腹腔镜下择期胆囊切除术（胆囊炎组，n=20）或者腹腔镜下急诊阑尾切除术（阑尾炎组，n=20）。所有患者麻醉诱导前开始输注RL，按15 mL/kg，35 min内输毕。采用酶联免疫（enzyme-linked immunosorbent assay,ELISA）方法测定血浆炎症（TNF-α,IL-10和CRP）或者内皮损伤生物标记物（syndecan-1,SDC-1）；利用血红蛋白（Hb）稀释-时间曲线和尿量，使用Phoenix软件，采用非线性混合效应模型分析计算RL液体动力学参数和协变量的影响。结果:与胆囊炎组相比，阑尾炎组RL从组织间隙到血浆的转运速率常数（k21）显著降低（14×10-3min-1 versus 35×10-3min-1;P=0.012）。阑尾炎组C反应蛋白（CRP）升高［中位数38.1(1.8-143.6) μg/mL versus 1.3(0.1-159.0) μg/mL;P<0.001］；与清醒状态相比，麻醉期间（输液开始后30～45 min），液体从中央室中到外周室的转运速率常数（k12）显著增加（57×10-3min-1 versus 32×10-3min-1；P<0.01）。清除速率常数（k10）降低90%（0.6×10-3min-1 versus 5.3×10-3min-1;P<0.001）。无论在清醒状态还是麻醉状态下低血压均能降低液体清除；炎症或者内膜损伤的生物标记物不能作为显著影响RL液体动力学参数的协变量。结论:阑尾炎或者胆囊炎患者术前输入液体后“炎症反应的生物标记物”不是RL的液体动力学的协变量，但是两组患者中，全身麻醉期间输入液体的清除率下降。     

长距离定向钻进技术在巷道掘进超前探查中的应用研究

巷道掘进超前探查一般采用钻探方法的开展工作,常规回转钻进由于受钻进工艺等影响,存在钻孔施工长度短、影响正常掘进、施工精度较差等问题。而采用长距离掩护式定向钻进工艺开展超前探放水工作,可对掘进头600m范围内进行超前探查,钻孔施工长度较常规回转钻进孔长度增大3~4倍,在不影响掘进的前提下,可通过随钻测斜仪器实时对钻孔轨迹进行调整、监控,从而达到高精度、长距离对掘进前方进行超前探查,较常规超前探放水具有较大的优势[1]。     

Synthesis of highly efficient,structurally improved Li4SiO4 sorbents for high-temperature CO2 capture

Li₄SiO₄ sorbents for high-temperature CO₂ removal have drawn extensive attention owing to their potential application in carbon capture and storage (CCS). The major challenge in the application lies in the poor CO₂ capture performance under realistic conditions of low CO₂ concentrations, owing to the dense structure and poor porosity. In this work, Li₄SiO₄ sorbents were prepared with porous micromorphologies and large contact areas using a variety of organometallic Li-precursors, achieving fast CO₂ sorption kinetics, high capacity and excellent cyclic stability at a low CO₂ concentration (15?vol%). It was found that a high conversion of ~?74% was maintained for pure Li₄SiO₄ even after 100 sorption/desorption cycles. Moreover, by doping with Na₂CO₃ to reduce the CO₂ diffusion resistance, the conversion of the sorbent was further enhanced to 93.2%. The enhancement mechanism of alkali carbonate have been proven here to be ascribed to the formation of the eutectic melt of Li/Na carbonates, the existence and function of which has been confirmed in this study.     

辊式涂布法构建纸基牢固超疏水表面

采用辊式涂布的方法在纸基材料上构建超疏水表面，并对超疏水表面的牢固性、自清洁性和疏水性能进行评价。用γ-氨丙基三乙氧基硅烷和1H,1H,2H,2H-全氟辛基三乙氧基硅烷（POTS）对微米级和纳米级两种尺寸的TiO₂粒子进行疏水改性处理，然后将改性后的微/纳米TiO₂涂布在纸基材料表面。采用红外光谱（FTIR）对改性后的微/纳米TiO₂的化学组成进行了分析，采用扫描电镜（SEM）对涂布纸表面结构进行了表征，通过接触角、耐磨性和自洁净测试评价了涂层表面的超疏水性、牢固性和自清洁性。改性TiO₂的FTIR分析显示在1000～1500cm^-1之间出现多个C—F键的伸缩振动峰，表明POTS通过化学键与TiO₂表面发生了结合。涂布纸表面的SEM分析可以看出，纸基材料表面上均匀分布了微米和纳米尺寸的TiO₂颗粒，具备了类似荷叶表面微-纳结构的粗糙表面。涂层表面的水接触角为153°±1.5°，滚动角为3.5°±0.5°，水滴在涂层表面呈球形，极易滑落，涂层在水中浸泡7天后，接触角没有发生明显变化，表明纸张表面具备了优异的超疏水性能，且疏水稳定性较好。涂层表面经过10次循环磨损试验后，接触角仍能达到150°，滚动角为9°，表明机械摩擦没有对涂布纸表面的化学成分和粗糙结构造成明显的破坏，超疏水表面的牢固性较好。自洁净测试表明，涂布纸表面具有良好的自清洁和防污性能。该工艺过程操作简单，易于实现工业化生产，为在纸基表面构建综合性能优异的超疏水表面提供了一种新的便利途径。     

Influences of sodium species with different occurrence modes on the thermal behaviors and gas evolution during pyrolysis of a sodium-rich Zhundong subbituminous coal

The Zhundong coal (ZDC) with a huge proven reserve is featured by high abundance of sodium species which behaves actively in the thermal conversion of it. In this work, to better understand the multiple roles of sodium species in coal pyrolysis, influences of sodium species with different occurrence modes on the thermal behaviors and gas evolution during pyrolysis of a sodium-rich ZDC were investigated. Raw coal was initially demineralized by dilute hydrochloric acid. Subsequently, sodium species was reloaded into the demineralized sample by ion-exchanged or immersed method. For quantitative analyses, a thermo-gravimetric analyzer coupled with a mass spectrometer was used to record the weight loss of different samples and the ever-changing amount of gaseous products in pyrolysis. The results show that the structural change induced by demineralized and ion-exchanged treatment is mainly reflected in the band intensity of carboxyl groups. In pyrolysis of ZDC, total volatile matters yield has a close relation with the occurrence modes of sodium species. It is proved that water-soluble sodium species has catalytic effects on the thermal-cracking reactions, whereas exchangeable sodium species tends to facilitate char-formed reactions. Compared with exchangeable ones, water-soluble sodium species can be also volatilized more easily in pyrolysis. As for gas evolution, exchangeable sodium species can obviously affect formation of CO through char gasification and it is also favorable to formation of hydrogen radicals. Moreover, due to the low sulfur content in ZDC, the intensity of H₂S released from all samples is extremely weak, which suggests that ZDC is a suitable feedstock for clean coal utilization.     

胶片导切机旋转刀的有限元分析

基于有限元分析方法,对密炼机上辅机系统的胶片导切机旋转刀刀片强度进行分析,并根据分析结果优化旋转刀刀片的结构设计和材料选择。结果表明:传统机械破碎强度(P_b)理论不适用于胶片导切机旋转刀的胶片切割;在剪切力(F_2)一定的条件下,减小胶片导切机旋转刀刀片安装偏角或者增大刀刃宽度(W)可以降低旋转刀刀片的应力,从而减少刀片崩裂,延长刀片的使用寿命,也可以通过更换材料和改变热处理的方法来降低刀片制造成本;在F_2和P_b一定的条件下,适当增大W可以减小胶片导切机投产后的磨刀频率,降低维护成本。